Are you guys looking for Civil Engineering MCQ Questions with Answers PDF Free Download as per Civil Engineering new exam pattern? You came to the right page. This may assist you to understand and check your knowledge about the Subjects. Students also can take a free test of the Multiple Choice Questions of Civil Engineering. Each question has four options followed by the right answer. These Civil Engineering MCQ Questions are selected supported by the newest exam pattern.
Q1. The ratio of shearing stress to shearing strain within elastic limit, is known as
(A) Modulus of elasticity
(B) Shear modulus of elasticity
(C) Bulk modulus of elasticity
(D) Tangent modulus of elasticity
Answer: (B) Shear modulus of elasticity
Q2. Column footing is provided
(A) To spread the column load over a larger area
(B) To ensure that intensity of bearing pressure between the column footing and soil does not exceed permissible bearing capacity of the soil
(C) To distribute the column load over soil through the column footing
(D) All the above
Answer: (D) All the above
Q3. The maximum tensile and compressive bending stress in extreme fibres of rolled I-sections and channels on the effective section, is
(A) 1500 kg/cm2
(B) 1420 kg/cm2
(C) 1650 kg/cm2
(D) 2285 kg/cm2
Answer: (C) 1650 kg/cm2
Q4. In a built up section carrying a tensile force, the flanges of two channels are turned outward
(A) To simplify the transverse connections
(B) To minimize lacing
(C) To have greater lateral rigidity
(D) All the above
Answer: (C) To have greater lateral rigidity
Q5. Cold driven rivets range from
(A) 6 to 10 mm in diameter
(B) 10 to 16 mm in diameter
(C) 12 to 22 mm in diameter
(D) 22 to 32 mm in diameter
Answer: (C) 12 to 22 mm in diameter
Q6. When the ratio of the moment M to axial load P is greater than L/6, the resultant of the compressive bearing pressure which acts at a distance Y from one side, is given by
(A) y = (L/3) – (M/P)
(B) y = (L/2) – (P/M)
(C) y = (L/2) + (M/P)
(D) y = (L/3) + (M/P)
Answer: (B) y = (L/2) – (P/M)
Q7. The overlap of batten plates with the main members in welded connections should be more than
(A) 3 t
(B) 4 t
(C) 6 t
(D) 8 t
Where ‘t’ = thickness of the batten plate
Answer: (B) 4 t
Q8. The mechanism method of plastic analysis satisfies
(A) Equilibrium and mechanism conditions
(B) Equilibrium and plastic moment conditions
(C) Mechanism and plastic moment conditions
(D) Equilibrium condition only
Answer:(A) Equilibrium and mechanism conditions
Q9. A circular column section is generally not used in actual practice because
(A) It is uneconomical
(B) It cannot carry the load safely
(C) It is difficult to connect beams to the round sections
(D) All of the above
Answer: (C) It is difficult to connect beams to the round sections
Q10. A fillet weld may be termed as
(A) Mitre weld
(B) Concave weld
(C) Convex weld
(D) All the above
Answer: (D) All the above
Q11. Rolled steel beams are designated by Indian Standard series and its
(A) Weight per metre and depth of its section
(B) Depth of section and weight per metre
(C) Width of flange and weight per metre
(D) Weight per metre and flange width
Answer: (B) Depth of section and weight per metre
Q12. The safe working pressure for a spherical vessel 1.5 m diameter and having 1.5 cm thick wall not to exceed tensile stress 50 kg/cm2, is
(A) 16 kg/cm2
(B) 18 kg/cm2
(C) 20 kg/cm2
(D) 22 kg/cm2
Answer: (C) 20 kg/cm2
Q13. Modified moment of inertia of sections with a single web, is equal to moment of inertia of the section about Y-Y axis at the point of maximum bending moment and is multiplied by the ratio of
(A) Area of compression flange at the minimum bending moment to the corresponding area at the point of maximum bending moment
(B) Area of tension flange at the minimum bending moment of the corresponding area at the point of maximum bending moment
(C) Total area of flanges at the maximum bending moment to the corresponding area at the point of maximum bending moment
(D) None of these
Answer: (C) Total area of flanges at the maximum bending moment to the corresponding area at the point of maximum bending moment
Q14. When plates are exposed to weather, tacking rivets are provided at a pitch in line not exceeding (where t is the thickness of the outside plate).
(A) 8 t
(B) 16 t
(C) 24 t
(D) 32 t
Answer: (B) 16 t
Q15. Rise of a Jack arch is kept about
(A) 1/2 to 1/3 of the span
(B) 1/3 to 1/4 of the span
(C) 1/4 to 1/8 of the span
(D) 1/8 to 1/12 of the span
Answer: (D) 1/8 to 1/12 of the span
Design of Steel Structures MCQ SET wise with Answers
- Design of Steel Structures MCQ SET-1
- Design of Steel Structures MCQ SET-2
- Design of Steel Structures MCQ SET-3
- Design of Steel Structures MCQ SET-4
- Design of Steel Structures MCQ SET-5
- Design of Steel Structures MCQ SET-6
- Design of Steel Structures MCQ SET-7
- Design of Steel Structures MCQ SET-8
- Design of Steel Structures MCQ SET-9
- Design of Steel Structures MCQ SET-10
- Design of Steel Structures MCQ SET-11
- Design of Steel Structures MCQ SET-12
- Design of Steel Structures MCQ SET-13
- Design of Steel Structures MCQ SET-14
- Design of Steel Structures MCQ SET-15
- Design of Steel Structures MCQ SET-16
- Design of Steel Structures MCQ SET-17
- Design of Steel Structures MCQ SET-18
- Design of Steel Structures MCQ SET-19
- Design of Steel Structures MCQ SET-20
- Design of Steel Structures MCQ SET-21
We hope the given Civil Engineering MCQ Questions with Answers will definitely yield fruitful results. Hope you got enough ideas on the MCQs on Civil Engineering. If you have any queries related to Civil Engineering MCQs Multiple Choice Questions with Answers, drop your questions below and will get back to you in no time.