Highway Engineering exam papers – Set 16

Are you guys looking for Civil Engineering MCQ Questions with Answers PDF Free Download as per Civil Engineering new exam pattern? You came to the right page. This may assist you to understand and check your knowledge about the Subjects. Students also can take a free test of the Multiple Choice Questions of Civil Engineering. Each question has four options followed by the right answer. These Civil Engineering MCQ Questions are selected supported by the newest exam pattern.

Q1. First operation during the detailed survey of a hill road, is

(A) Hydrological and soil surveys
(B) Adjustment of alignment along with curves
(C) Derivation of longitudinal and cross-sections
(D) Fixation of Bench Marks

Answer: (D) Fixation of Bench Marks

Q2. If R is the radius of a main circular curve, Δ is the angle of deflection and α is the polar deflection angle of any point, its radial distance is

(A) 3 R √(sin Δ/3 sin 2α)
(B) 3 R √(sin Δ/2 sin 3α)
(C) 3 R √(sin Δ/3 sin α/2)
(D) 3 R √(sin 2Δ sin α)

Answer: (A) 3 R √(sin Δ/3 sin 2α)

Q3. If A is the projected area of a vehicle in square meters, V is speed of the vehicles in kilometers per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by

(A) R = CAV
(B) R = CAV2
(C) R = CAV3
(D) R = C2AV

Answer: (B) R = CAV2

Q4. Pick up the incorrect statement from the following. The width of the right-of-way is decided so as to accommodate

(A) Formation width
(B) Side slopes
(C) Horizontal curve
(D) Vertical curve

Answer: (D) Vertical curve

Q5. Raising of outer edge of a road with respect to inner edge, is known

(A) Super elevation
(B) Cant
(C) Banking
(D) All the above

Answer:(D) All the above

Q6. If the radius of curvature of a hill road is 50 m, the percentage grade compensation should be

(A) 60/R
(B) 70/R
(C) 75/R
(D) 80/R

Answer: (C) 75/R

Q7. The type of transition curves generally provided on hill roads, is

(A) Circular
(B) Cubic parabola
(C) Lemniscate
(D) Spiral

Answer:(D) Spiral

Q8. The G.T. road from Lahore to Calcutta in undivided India, was constructed during

(A) 3495-3500 BC
(B) 265-270 BC
(C) 1540-1545 AD
(D) 1440-1450 AD

Answer: (C) 1540-1545 AD

Q9. The efficiency of the brakes of a vehicle depends upon

(A) Condition of road surface
(B) Condition of the tyres
(C) Presence of the show moisture
(D) All the above

Answer: (D) All the above

Q10. When a number of hair pin bends are introduced, a minimum intervening distance in between is kept

(A) 20 m
(B) 40 m
(C) 60 m
(D) 100 m

Answer: (C) 60 m

Q11. Endoscope is used to determine

(A) Spot speed
(B) Average speed
(C) Travel time
(D) None of these

Answer: (A) Spot speed

Q12. On a pavement with parabolic camber, the angle of inclination of the vehicles will be

(A) More at the crown
(B) Less at the edges
(C) More at the edges
(D) Same at the edges as well as at the crown

Answer: (C) More at the edges

Q13. If cross slope of a country is 10% to 25%, the terrain is classified as

(A) Rolling
(B) Mountainous
(C) Steep
(D) Plain

Answer: (A) Rolling

Q14. The minimum road width is taken

(A) 9 m
(B) 12 m
(C) 16 m
(D) 20 m

Answer: (A) 9 m

Q15. Deviation of the alignment of a trace cut may be permitted in areas involving

(A) Land slides
(B) Sand dunes
(C) Dens
(D) None of these

Answer: (A) Land slides

We hope the given Civil Engineering MCQ Questions with Answers will definitely yield fruitful results. Hope you got enough ideas on the MCQs on Civil Engineering. If you have any queries related to Civil Engineering MCQs Multiple Choice Questions with Answers, drop your questions below and will get back to you in no time.